Blind Spot Angles Morts Truck Sticker Warning Sticker
These French Blind spot Stickers, also known as Angles Morts Stickers, are mandatory in France from the 1st of January 2021. From this date, all vehicles above 3.5 tonnes are required to display these stickers on the vehicles such as heavy goods vehicles, trucks, lorries, buses, coaches etc.
See images for placement of stickers
17cm Wide x 25cm High
Need A Different Size or Custom Design Sticker? Please contact us with your requirements
These French Blind spot Stickers, also known as Angles Morts Stickers, are mandatory in France from the 1st of January 2021. From this date, all vehicles above 3.5 tonnes are required to display these stickers on the vehicles such as heavy goods vehicles, trucks, lorries, buses, coaches etc.
See images for placement of stickers
17cm Wide x 25cm High
Trucks, Lorries and Tractor Units:
On trucks and tractor units, the stickers must be installed on both sides of the vehicle and on the rear. On both sides, the stickers must be applied on the front of the cab, at a height between 0.9 and 1.5 meters from the ground. The sticker on the rear must be applied to the right-hand side of the truck or tractor unit. This sticker must also be applied at a height between 0.9 and 1.5 meters from the ground.
Trailers and semi-trailers:
Stickers must also be applied to trailers and semi-trailers. On the rear of the trailer, the sticker must be applied on the right-hand side with a height between 0.9 and 1.5 meters. In addition, the stickers must also be applied on each side. On the body, this must be done within the first meter (at a height of 0.9 - 1.5 meters). For the trailers, the stickers must be applied on both sides within the first meter behind the fifth wheel (at a height of 0.9 - 1.5 meters).
Exceptions:
There are a number of exceptions to the rule. This applies to vehicles where it is impossible to apply the stickers to the required areas on the vehicle. In this scenario, the stickers should be placed at the nearest height possible, as long as it falls within the 2.10 meter limit.
Some examples of vehicles where the stickers may be applied in other places are car transporters, tractor units for trailers, container chassis, platform vehicles, tank vehicles, adjustable arms for dump trucks and dollies. It is not possible to affix the markings on the rear of the vehicle on these vehicles, therefore the sticker may be affixed in a position compatible with the characteristics of the vehicle.
Vehicles, where it is structurally impossible to apply the stickers to the side and/or rear, are exempt from the blind spot sticker scheme.
Need A Different Size or Custom Design Sticker? Please contact us with your requirements
| Condition | New |
|---|---|
| Manufacturer | Vinyl Cut Graphics |
| Extra Information | We specialise in making REPRODUCTION/
Professional Grade - Comes sandwiched between a backing sheet and an application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |